PFlow Industries, Inc.
Since 1977, PFlow has been solely devoted to the design and manufacturer of vertical reciprocating conveyors (VRC’s) material handling equipment, systems, and specials. As the VRC pioneer, PFlow has led the industry from the start.
414-352-9000
6720 N. Teutonia Avenue Milwaukee, WI, 53209 USA

414.352.9000

6720 North Teutonia Avenue
Milwaukee, WI 53209
Request a Quote

A vertical reciprocating conveyor (VRC) is essential if you want to convert space in your warehouse. Why? Because it allows access to every square foot of space.

You can use a lift to move heavy loads of inventory and materials up to mezzanine areas or down to basement areas. This makes use of every part of your building. And the lift method is safer in the long run, which makes it more affordable than using forklifts.

Convinced yet? We hope so!

Now you just need to decide what type of lift you want to install: a mechanical lift or a hydraulic lift. We’ll take a look at both types here.

Mechanical Lifts

Mechanical lifts work by using a cable lifting system. Key points to remember about mechanical lifts are:

  • They can be made in almost any shape and size.
  • The two types of lifting mechanism are straddle and cantilever.
  • Straddle systems work with a set of tracks on either side of the lifting cage. The bucket or cage “straddles” the tracks and is lifted between them with cables. Hence the name.
  • The cantilever lift uses tracks that are fixed to a wall on one side. The lifting cage rises perpendicular to the track.

In general:

  • Mechanical lifts provide a smooth ride, so you won’t damage materials. They can travel between multiple levels and require less maintenance than an elevator or a hydraulic lift.
  • They also allow for 360 degrees of access for easy unloading.
  • They are customizable, so they can work with the needs of your business. Manual controls or full automation, it’s up to you.
  • Mechanical lifts can run almost continuously, leaving you with little downtime, and they also require very little maintenance. This type of lift is more expensive upfront but has fewer costs over time.

Hydraulic Lifts

hydraulic lift in a garageAll hydraulic lifts work by compressing fluid to generate power and lift the cage. They offer many of the same benefits of the mechanical lift.

If you’re considering a hydraulic lift, remember:

  • Hydraulic lifts also come in the straddle and cantilever variety.
  • They tend to take up less space than mechanical lifts.
  • The hydraulic action is stronger and can lift heavier loads.
  • These lifts are fully automated. They can even be controlled remotely, with no overhead structural requirements.
  • Hydraulic lifts are cheaper to purchase and install. They are the cost-effective alternative to mechanical lifts and elevators.

On the downside:

  • They are more sluggish than a mechanical lift.
  • They have limited cycle rates. So, you can’t use one too much before giving it time to rest.
  • Hydraulic fluid is toxic, and you run the risk of leaks. Because they require fluid to operate, they need more maintenance in the long run.

Which Lift Works for Your Needs

The right lift depends on your needs. If you’re working on a small budget, a hydraulic lift might work best. But if your goal is to have limited maintenance over the life of the lift, you might choose a mechanical lift instead. In general, for small spaces, a hydraulic is the way to go. But if you need a lift that has little downtime, mechanical is what you want.

If you’re interested in installing a VRC but you’re not sure which lift will best meet your needs, contact us today. We can help you find the right lift for your loads and goals. And don’t forget to check out our VRC blog for more information on what we offer.