Safety Gates

Quality, code-approved safety gates provide maximum safety protection for VRC installations.

  • All gates are equipped with mechanical lock and contact interlocks. 
  • In a manual loading application, each unit must be equipped with a safety gate that is electrically and mechanically interlocked with the carriage movement. 
  • Vertical acting gates, available in single and bi-panel models save space, don’t intrude into aisles and are not easily damaged. 
  • Bi-panel models, with telescoping panels, offer the most space-efficient protection and require significantly less overhead clearance.
  • Non-binding UHMW sliding guides on vertical acting gates tolerate misaligned posts better than roller guides and are more resistant to damage. A chain is used instead of cable for greater strength and durability.
  • Vertical acting gates are counterbalanced with an exclusive cross-shaft design. This ensures the gate remains constantly level when raised from either the right side, left side or center.
  • Single or bi-parting swing gates and sliding gates are offered in a variety of widths. Tubular panel construction on swing gates allows for gates up to 7’ wide.
  • Both pneumatic and motorized operators are available for vertical acting and sliding gates to allow push-button operation.
 

PFlow Bi-parting Swing GateSingle and Bi-parting Swing Gates

PFlow single and bi-parting swing gates are code approved

Standard single and bi-parting swing gates provide 7’0″ load clearance

Maximum single panel width: 6’ (overall) mounted on a 5′ wide carriage

Standard bi-parting panel width: Up to 8′ (overall) mounted on a 7′ 0″ wide carriage and 8′ to 11′ (overall) mounted on a 10′ 0″ wide carriage

DIMENSIONS & DATA SINGLE SWING GATE PDF

DIMENSIONS & DATA BI-PARTING SWING GATE PDF

PFlow Sliding GateSliding Gates

PFlow single and bi-panel sliding gates are code-approved

Designed to be space-efficient and does not encroach into the loading area

Pneumatic or motorized operators available for push-button operation

Standard single and bi-panel slide gates provide 7’0″ load clearance

Standard single panel width: Up to 8′ (overall) mounted on a 7′ 0″ wide carriage and 8′ to 11′ (overall) mounted on a 10′ 0″ wide carriage

Standard bi-panel width: Up to 8′ (overall) mounted on a 7′ 0″ wide carriage; 8′ to 11′ (overall) mounted on a 10′ 0″ wide carriage; and 11′ to 14′ (overall) mounted on a 13′ 0″ wide carriage

DIMENSIONS & DATA SINGLE SLIDING GATE PDF

PFlow Vertical Acting GateVertical Acting Gates

PFlow single and bi-panel vertical acting gates are code approved

Designed to be space efficient and to keep aisles clear

Pneumatic or motorized operators available for push-button operation

Counterbalanced with an exclusive cross-shaft design to ensure gate remains level at all times

Non-binding UHMW sliding guides are more resistant to damage; chain, instead of cable, provides greater durability

Standard single panel height and bi-panel closed height is 6’0″ and provides 7’0″ clearance

DIMENSIONS & DATA SINGLE-PANEL GATE PDF

DIMENSIONS & DATA BI-PANEL GATE PDF

Share This Page

414.352.9000